Super small Linux + AI + WiFi + ETH module : BITV?
NPU: 200Gops, Conv, Activation, Pooling, BN, LRN
100Mbps eth and 150Mbps WiFi
Storage: SPI flash / SD card
MIPI-CSI: 2-lane max 5M pixel
LCD: easy drive 5-inch LCD
USB: HS OTG
No direct FPC connectors for camera and LCD? Or even mount sensor to PCB. Then use microJST for Ethernet and GPIO?.
Like a normal security camera module?
Should be cheaper to make using security module type design. You only need one PCB.
The 8080 interface type does not have a universal wire sequence connector, unlike RGB 40Pins.
I am looking for mipi-csi (2-lane) whether the line sequence is universal.
In addition, if the core board is equipped with FPC24, it may limit the assembly.
V831 does not support MIPI display
Consider three use cases:
- LCD attached to PCB with camera
- standalone camera using wifi, no display
- USB cable from board back to host PC.
You could make assembly like a sports camera, sensor pointing forward with display on the back.
optional use case...
4) POE with no screen
Maybe you can put pins in the right places to use off-the-shelf POE module.
Something similar to this
Random 8080 pinouts can be handled by having the FPC on the V831 board support the LCD you are going to sell. Any other pin out will need to make a small PCB with two FPC connectors and remap the cables.